修理を始めるには コミュニティ ストア

Circular Saw Blade Replacement

はじめに

Whether your circular saw blade is worn out, or you just want to switch it out for a different style, it’s really easy to swap out blades on pretty much any circular saw—and it takes just a few minutes.

This guide uses a Ryobi P504G circular saw, but the process is very similar for most circular saws.

必要な工具と部品

  1. Circular Saw Blade Replacement, Blade: 手順 1、 2の画像 1 Circular Saw Blade Replacement, Blade: 手順 1、 2の画像 2

    • Unplug your circular saw or remove the battery before replacing the blade!

    編集

  2. Circular Saw Blade Replacement: 手順 2、 3の画像 1 Circular Saw Blade Replacement: 手順 2、 3の画像 2 Circular Saw Blade Replacement: 手順 2、 3の画像 3

    • Press and hold down the blade lock button to keep the blade from turning while you loosen it.

    • Loosen the arbor's hex bolt in the center of the blade using a 5mm hex key, making sure to loosen clockwise since the bolt threads are reversed.

    • Your circular saw may already come with a hex key.

    編集

  3. Circular Saw Blade Replacement: 手順 3、 2の画像 1 Circular Saw Blade Replacement: 手順 3、 2の画像 2

    • Once loosened, continue unscrewing the bolt with your fingers and remove it from the saw.

    編集

  5. Circular Saw Blade Replacement: 手順 4、 2の画像 1 Circular Saw Blade Replacement: 手順 4、 2の画像 2

    • Remove the arbor washer.

    編集

  6. Circular Saw Blade Replacement: 手順 5、 3の画像 1 Circular Saw Blade Replacement: 手順 5、 3の画像 2 Circular Saw Blade Replacement: 手順 5、 3の画像 3

    • Completely retract the blade guard.

    • You can hold the blade guard in place with a clamp while you change the blade.

    編集

  7. Circular Saw Blade Replacement: 手順 6、 3の画像 1 Circular Saw Blade Replacement: 手順 6、 3の画像 2 Circular Saw Blade Replacement: 手順 6、 3の画像 3

    • Set the circular saw on its side and carefully lift up the blade to unseat it from the arbor.

    • Slowly slide out the blade.

    • Use extreme caution when handling the blade!

    編集

  8. Circular Saw Blade Replacement: 手順 7、 1の画像 1

    • When inserting the new blade, be sure to note its rotation and install it in the correct orientation.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

Craig Lloyd

メンバー登録日: 02/10/16

35,480 ポイント

82のガイドは作成済み

バッジ: 41

+38 個以上のバッジ

3 件のコメント

Hello!
I learned a lot of important things, but I have a Question that is this Circular Saw perfect to cut Concrete Pavers?

F6 Adhesive Tape - 返信

I think you need a cutting disc in your circular saw

to cut concrete.

Toon Konings - 返信

the problem is that cutting concrete with a concrete disk produces a lot of concrete dust. It will kill your machine. It is not possible to stop the dust by pouring water as you would do with a tile cutting machine.

vief - 返信

コメントを追加

統計データ:

過去 24時間: 11

過去 7 日: 52

過去 30 日: 291

今までの合計 6,829