修理を始めるには コミュニティ ストア

Canon Selphy CP1200 Print Mechanism Replacement

作成者： W Sherer (そして 2 人のその他投稿者)
  • コメント: 2
  • お気に入り: 0
  • 完了: 1

難易度

普通

手順

12

所要時間

15 - 20 分

セクション

3

フラグ

0

はじめに

This guide shows how to replace the printing mechanism for the Canon Selphy CP1200. This replacement may be necessary if the printing mechanism is faulty or is printing poor quality pictures while other device components are working and troubleshooting has failed. It is also a preliminary step for replacing both the battery leads and cooling fan.

ツール

パーツ

パーツは指定されていません。

  1. Unscrew the four 6mm PH000 corner screws.

    • Unscrew the four 6mm PH000 corner screws.

    • This will require a screwdriver with a long, narrow shaft.

    翻訳

  2. Unscrew the three 4mm PH1 screws on the bottom of the printer.

    • Unscrew the three 4mm PH1 screws on the bottom of the printer.

    翻訳

  3. Gently pry open the top of the case from either the front or back.

    • Gently pry open the top of the case from either the front or back.

    • A plastic opening tool may help.

    • Be careful in lifting the top assembly as it is attached to the motherboard at this point.

    翻訳

  4. Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.

    • Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.

    • Tweezers may be useful given the limited space between the top assembly and motherboard.

    • The top assembly, containing both the LCD and buttons, will now be completely free

    翻訳

  6. Detach the fan cable from the motherboard.

    • Detach the fan cable from the motherboard.

    翻訳

  7. Detach the ribbon cable leading to the DC in port and battery leads.

    • Detach the ribbon cable leading to the DC in port and battery leads.

    • Tweezers may be useful.

    翻訳

  8. Unscrew the three 3mm PH000 screws from the motherboard.

    • Unscrew the three 3mm PH000 screws from the motherboard.

    翻訳

  9. Disconnect the bundled cables leading to the printing mechanism.

    • Disconnect the bundled cables leading to the printing mechanism.

    翻訳

  10. Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.

    • Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.

    • Tweezers may be useful due to the limited amount of space.

    翻訳

  11. Open the side door and depress the ink cassette release. Slide out and remove the ink cassette.

    • Open the side door and depress the ink cassette release.

    • Slide out and remove the ink cassette.

    翻訳

  12. Unscrew the three 3mm PH000 screws securing the metal plate to the printing mechanism.

    • Unscrew the three 3mm PH000 screws securing the metal plate to the printing mechanism.

    翻訳

  13. Lift out the print mechanism of the printer case.

    • Lift out the print mechanism of the printer case.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2他の投稿者と一緒に

W Sherer

メンバー登録日: 2019年01月16日

593 ポイント

5のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

Eastern Washington University, Team S1-G3, Crawford Winter 2019 Eastern Washington University, Team S1-G3, Crawford Winter 2019人のメンバー

EWU-CRAWFORD-W19S1G3

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 24

今までの合計 878