修理を始めるには コミュニティ ストア

Canon Powershot SX500 IS LCD Screen Replacement

はじめに

In order to replace the LCD screen you will need a PH00 screwdriver and a spudger. Be careful with the connections to the board it is easy to break.

必要な工具と部品

  1. Canon Powershot SX500 IS LCD Screen Replacement, Battery: 手順 1、 1の画像 1

    • Rotate the camera to expose the underside of the camera.

    編集

  2. Canon Powershot SX500 IS LCD Screen Replacement: 手順 2、 1の画像 1

    • Slide the rounded rectangle tab to the left to release the battery cover.

    編集

  3. Canon Powershot SX500 IS LCD Screen Replacement: 手順 3、 1の画像 1

    • Push the small orange tab forward to release the battery (Battery is ready for removal).

    編集

  4. Canon Powershot SX500 IS LCD Screen Replacement, Back Cover: 手順 4、 3の画像 1 Canon Powershot SX500 IS LCD Screen Replacement, Back Cover: 手順 4、 3の画像 2 Canon Powershot SX500 IS LCD Screen Replacement, Back Cover: 手順 4、 3の画像 3

    • Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.

    編集

  5. Canon Powershot SX500 IS LCD Screen Replacement: 手順 5、 1の画像 1

    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

    編集

  7. Canon Powershot SX500 IS LCD Screen Replacement: 手順 6、 1の画像 1

    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

    編集

  8. Canon Powershot SX500 IS LCD Screen Replacement: 手順 7、 1の画像 1

    • Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.

    編集

  9. Canon Powershot SX500 IS LCD Screen Replacement: 手順 8、 2の画像 1 Canon Powershot SX500 IS LCD Screen Replacement: 手順 8、 2の画像 2

    • Using the plastic pry tool, remove the back cover from camera.

    編集

  10. Canon Powershot SX500 IS LCD Screen Replacement, Control Dial: 手順 9、 1の画像 1

    • Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.

    編集

  11. Canon Powershot SX500 IS LCD Screen Replacement: 手順 10、 1の画像 1

    • Using the Phiillips 00 screwdriver, remove the 4mm screw to the right of the control dial.

    編集

  12. Canon Powershot SX500 IS LCD Screen Replacement: 手順 11、 1の画像 1

    • Using the spudger, lift the control dial to the right of the LCD screen.

    編集

  13. Canon Powershot SX500 IS LCD Screen Replacement: 手順 12、 1の画像 1

    • Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.

    編集

  14. Canon Powershot SX500 IS LCD Screen Replacement, LCD Screen: 手順 13、 1の画像 1

    • Using spudger, lift the tab on the connector and remove the orange ribbon from motherboard (LCD screen is separated from camera).

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Marty Woolf

メンバー登録日: 04/07/15

173 ポイント

1ガイドが承認済み

バッジ: 12

+9 個以上のバッジ

チーム

Eastern Washington University, Team 1-4, Plummer Spring 2015 Eastern Washington University, Team 1-4, Plummer Spring 2015人のメンバー

EWU-PLUMMER-S15S1G4

4 メンバー

6のガイドは作成済み

2 件のコメント

Hello, my LCD screen is not working. One day it was fine, the next day I powered my camera and the LCD screen is only half visible. I appreciate the directions on how to take out/repair LCD screen, though where am I able to purchase a new LCD screen for my PowerShot SX500IS? Many thanks.

dana karavias - 返信

Disassembly of SX510HS is exactly the same. No special pry tool is required - it is very easy to remove the cover with your fingernail. Replacement LCD on Aliexpress is 8-12 USD.

Witold Kardyś - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 6

今までの合計 1,076