修理を始めるには コミュニティ ストア

Canon Powershot SX500 IS Battery Replacement

はじめに

The user will need a replacement battery or fully charged battery to insert into the camera. No tools required.

  1. Canon Powershot SX500 IS Battery Replacement, Battery: 手順 1、 1の画像 1

    • Rotate the camera to expose the underside of the camera.

    編集

  3. Canon Powershot SX500 IS Battery Replacement: 手順 2、 1の画像 1

    • Slide the rounded rectangle tab to the left to release the battery cover.

    編集

  4. Canon Powershot SX500 IS Battery Replacement: 手順 3、 1の画像 1

    • Push the small orange tab forward to release the battery (Battery is ready for removal).

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Jody Wilkerson

メンバー登録日: 04/07/15

565 ポイント

4のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

Eastern Washington University, Team 1-4, Plummer Spring 2015 Eastern Washington University, Team 1-4, Plummer Spring 2015人のメンバー

EWU-PLUMMER-S15S1G4

4 メンバー

6のガイドは作成済み

2 件のコメント

Simple & to the point. One would think manufacturers would hop on-board recruiting others like yourself.

Will check your site for other "ifixits". (Completely unsolicited).

Jim

Jim Brennan - 返信

Hi guys, I have a Canon SX500 IS and I jumped inside the swimming pool with its original battery by mistake so it was wet and decided to buy another battery after 4 years and put back on but it's still not switching on

I need some advice guys please what should I do?

Lwazi - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 9

今までの合計 1,129