メインコンテンツにスキップ

Canon Powershot SD790 IS Release Button Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。
  1. Canon Powershot SD790 IS Release Button Replacement, Release Button: 手順 1、 2の画像 1 Canon Powershot SD790 IS Release Button Replacement, Release Button: 手順 1、 2の画像 2
    • Squeeze the sides of the plastic connector while gently detaching the cable. Your shutter release button is now removed and can be replaced.

    • The shutter release button assembly should only be attached by a small red and black wire, with a plastic connector at the end.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Stanley

メンバー登録日: 01/30/11

372 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 4-33, Regan Winter 2011 Cal Poly, Team 4-33, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S4G33

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 3

今までの合計 949