修理を始めるには コミュニティ ストア

Canon Powershot A610 Camera Housing Replacement

はじめに

This guide demonstrates how to replace the housing of a Canon Powershot A610. In order to get to the internals of the Canon A610, the plastic casing around the camera must be removed.

必要な工具と部品

  1. Canon Powershot A610 Camera Housing Replacement, Batteries: 手順 1、 2の画像 1 Canon Powershot A610 Camera Housing Replacement, Batteries: 手順 1、 2の画像 2

    • Unlock the battery cover, while swinging the cover outward to open it.

    編集

  2. Canon Powershot A610 Camera Housing Replacement: 手順 2、 1の画像 1

    • Turn the camera over and allow the batteries to fall out.

    • Close the battery cover.

    編集

  3. Canon Powershot A610 Camera Housing Replacement, Camera Housing: 手順 3、 3の画像 1 Canon Powershot A610 Camera Housing Replacement, Camera Housing: 手順 3、 3の画像 2 Canon Powershot A610 Camera Housing Replacement, Camera Housing: 手順 3、 3の画像 3

    • Remove the three 3 mm screws that attach the side panel to the body of the camera.

    • Using your fingernails, pull the side panel outward to remove it.

    • Remove the two remaining 2 mm screws that attach to the frame of the camera.

    編集

  4. Canon Powershot A610 Camera Housing Replacement: 手順 4、 1の画像 1

    • Remove the 3 mm screw that sits at the bottom of the camera, near the front side.

    • Remove the 4 mm screw that sits at the bottom of the camera, near the back side.

    編集

  5. Canon Powershot A610 Camera Housing Replacement: 手順 5、 1の画像 1

    • Open the battery cover.

    • Remove the 5 mm screw that sits on the top of the battery slot.

    • Remove the three 6 mm screws that sit at the bottom of the battery slot.

    • Close the battery cover.

    編集

  6. Canon Powershot A610 Camera Housing Replacement: 手順 6、 2の画像 1 Canon Powershot A610 Camera Housing Replacement: 手順 6、 2の画像 2

    • Open the digital A/V DC terminal cover.

    • Remove the three 4 mm screws.

    • Detach the digital A/V DC terminal.

    • When you reassemble the camera, leave the topmost screw out until after you put the top casing back.

    編集

  7. Canon Powershot A610 Camera Housing Replacement: 手順 7、 1の画像 1

    • Grip the sides of the top cover and gently lift it until it detaches from the camera.

    • Do not completely remove the top cover; an orange ribbon cable still connects it to the camera.

    編集

  8. Canon Powershot A610 Camera Housing Replacement: 手順 8、 2の画像 1 Canon Powershot A610 Camera Housing Replacement: 手順 8、 2の画像 2

    • Open the battery cover.

    • With the camera upside down, pull the side of the front case that is closest to you, in an outward movement.

    • Apply some force, but pull the front case gently to prevent damage.

    編集

  9. Canon Powershot A610 Camera Housing Replacement: 手順 9、 2の画像 1 Canon Powershot A610 Camera Housing Replacement: 手順 9、 2の画像 2

    • Open the memory card slot cover.

    • Remove the 3 mm screw that sits near the bottom of the case.

    編集

  10. Canon Powershot A610 Camera Housing Replacement: 手順 10、 3の画像 1 Canon Powershot A610 Camera Housing Replacement: 手順 10、 3の画像 2 Canon Powershot A610 Camera Housing Replacement: 手順 10、 3の画像 3

    • Flip the LCD screen all the way open.

    • Grip both sides of top of the back case and gently pull it, in an outward movement, until the case detaches.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

11人の作成者と共同で作成されました。

Matthew Ramirez

メンバー登録日: 01/20/11

625 ポイント

5のガイドは作成済み

バッジ: 11

+8 個以上のバッジ

チーム

Cal Poly, Team 11-26, Maness Winter 2011 Cal Poly, Team 11-26, Maness Winter 2011人のメンバー

CPSU-MANESS-W11S11G26

3 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 23

今までの合計 9,062