修理を始めるには コミュニティ ストア

Canon PowerShot SX280 HS Back Button Panel Replacement

必要な工具と部品

  1. Canon PowerShot SX280 HS Back Button Panel Replacement, Back Button Panel: 手順 1、 1の画像 1

    • Before taking apart your device the two most important steps are:

    • Turning the camera off

    • Removing the battery to reduce the risk of shock

    編集

  2. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 2、 1の画像 1

    • Turn off the camera by holding the ON/OFF on the top of the camera.

    編集

    • Now that the camera is off the battery must be removed.

    • Firmly place your finger on the battery door and slide to the right.

    • Once the door is open, there will be a small orange button, which is the battery release. Slide this button down to release the battery.

    編集

  5. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 4、 1の画像 1

    • Once the battery is removed, you can begin to take the outer screws out. Removing these will allow you to remove the camera case. It will require a #00 phillips screwdriver.

    • Be sure to be careful when removing these screws as they are easy to lose. Be gentle as well, as they are made of weak material and can strip easily.

    編集

  6. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 5、 1の画像 1

    • There are two screws in the left side of the camera, which are marked in the photo. These screws are

    編集

  7. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 6、 1の画像 1

    • There are two screws to remove on the right side of the camera, which are marked in the photo. These screws are

    編集

  8. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 7、 1の画像 1

    • Finally, there are two screws on the bottom that need to be removed. These screws are

    編集

  9. Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 8、 2の画像 1 Canon PowerShot SX280 HS Back Button Panel Replacement: 手順 8、 2の画像 2

    • Now that the outer screws have been removed you can begin to remove the back case which contains the buttons.

    • Gently remove the back case, and replace it with the new one.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Mason Boyd

メンバー登録日: 03/23/15

228 ポイント

2のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

UMass Dartmouth, Team 1-5, Miles Spring 2015 UMass Dartmouth, Team 1-5, Miles Spring 2015人のメンバー

UMASSD-MILES-S15S1G5

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 8

今までの合計 510