メインコンテンツにスキップ

Canon PowerShot SD700 E18 Error Replacement

必要な工具と部品

  1. Canon PowerShot SD700 E18 Error Replacement, Outside Case: 手順 1、 1の画像 1
    • Turn off the camera by pressing the power button above the LCD screen.

  2. Canon PowerShot SD700 E18 Error Replacement: 手順 2、 1の画像 1
    • Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.

  3. Canon PowerShot SD700 E18 Error Replacement: 手順 3、 1の画像 1
    • Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.

  4. Canon PowerShot SD700 E18 Error Replacement: 手順 4、 1の画像 1
    • Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.

  5. Canon PowerShot SD700 E18 Error Replacement: 手順 5、 1の画像 1
    • Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.

    • This screw will be longer than the rest of the screws.

  6. Canon PowerShot SD700 E18 Error Replacement: 手順 6、 1の画像 1
    • Remove the front, back, and side casings from the camera and set to the side.

  7. この手順で使用する道具:
    Dust Blower
    $4.99
    購入する
    • Clean the lens and the area surrounding the lens with a soft brush and dust blower.

    • Tweezers can be helpful when removing sand.

    • Reassemble the camera and if the E18 error persists, further disassembly of the camera may be required.

終わりに

To reassemble your device, follow steps 1-6 instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

6人の作成者と共同で作成されました。

Aaron Lee

メンバー登録日: 04/07/11

212 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 9-71, Walters Spring 2011 Cal Poly, Team 9-71, Walters Spring 2011人のメンバー

CPSU-WALTERS-S11S9G71

4 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 26

今までの合計 2,912