この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。
はじめに
This guide shows the user how to take out the logic board, and therefore have the opportunity to replace a defective board.
必要な工具と部品
-
-
Unscrew the six screws on the casing. Two are on the bottom as pictured; two more are on each side of the camera.
-
-
-
-
Remove the LCD cable by gently prying the hinge open with a spudger or your finger. The cable should easily slide out.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.