修理を始めるには コミュニティ ストア

Canon PowerShot S50 Front Panel/Battery Door Replacement

はじめに

Use this guide to replace the front panel of the camera as well as the battery door.

必要な工具と部品

  1. Canon PowerShot S50 Front Panel/Battery Door Replacement, Battery: 手順 1、 2の画像 1 Canon PowerShot S50 Front Panel/Battery Door Replacement, Battery: 手順 1、 2の画像 2

    • Place camera LCD side up and press up on the battery door.

    • Let it swing open until you can see the battery inside.

    編集

  2. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 2、 1の画像 1

    • Press down on the orange plastic.

    • This will gently eject the battery from its compartment.

    編集

  3. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 3、 2の画像 1 Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 3、 2の画像 2

    • Holding the edges, slide out the battery.

    編集

  4. Canon PowerShot S50 Front Panel/Battery Door Replacement, Front Panel/Battery Door: 手順 4、 1の画像 1

    • Look at the camera from the side with the lanyard and 4 screws.

    • Remove the two 3.4 mm screws on the metallic colored part.

    編集

  5. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 5、 1の画像 1

    • Remove the 3mm screw on the top left.

    • NOTE: When reassembling, it is helpful to put the top screw back in before placing the front cover back on the camera.

    • Now remove the 5.3mm screw on the bottom.

    編集

  7. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 6、 1の画像 1

    • Place the camera LCD side down.

    • Remove the two 5.3mm screws by the battery door.

    編集

  8. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 7、 1の画像 1

    • Remove the four 3.4mm screws on the bottom of the camera around the tripod mount.

    • Make sure to keep these screws separate from the previous 5.3 mm screws.

    編集

  9. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 8、 1の画像 1

    • Stand the camera back up.

    • Remove the two 3.6mm screws on the side with the A/V Out port.

    編集

  10. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 9、 1の画像 1

    • Lift open the rubber flap covering the A/V Out port.

    • Remove the 3.4mm screw in the center.

    • During reassembly, put the A/V out rubber door on before replacing the front panel of the camera

    編集

  11. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 10、 1の画像 1

    • Use a spudger and gently open up the front panel of the camera.

    • A thin plastic ribbon will stay connected by a brown piece to front panel of the camera.

    編集

  12. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 11、 1の画像 1

    • There will be a brown plastic piece keeping the thin plastic ribbon in place.

    • Use the spudger to pull out the brown plastic piece attached to the orange plastic.

    編集

  13. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 12、 1の画像 1

    • Use a pair of tweezers and remove the metal piece inside the camera.

    編集

  14. Canon PowerShot S50 Front Panel/Battery Door Replacement: 手順 13、 1の画像 1

    • Remove the battery door

    • NOTE: Putting this back on requires aligning the spring on the back of the door with the hole on the camera

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Karim

メンバー登録日: 04/12/12

24 ポイント

3のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

Cal Poly, Team 7-34, Maness Spring 2012 Cal Poly, Team 7-34, Maness Spring 2012人のメンバー

CPSU-MANESS-S12S7G34

5 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 12

今までの合計 1,255