修理を始めるには コミュニティ ストア

Canon PowerShot G12 LCD Screen Replacement

はじめに

Replacing the LCD screen is a highly-invasive, step-intensive process that becomes necessary if the screen has sustained damage to due a crack, water, or an otherwise internal malfunction.

In this guide, you will learn how to replace the LCD screen carefully.

必要な工具と部品

  1. Canon PowerShot G12 LCD Screen Replacement, LCD Screen: 手順 1、 1の画像 1

    • Open the LCD screen from its locked position so the screen is visible.

    編集

  2. Canon PowerShot G12 LCD Screen Replacement: 手順 2、 1の画像 1

    • Flip the LCD screen perpendicular to the camera exposing the side screws.

    • Using a Phillips-head 00 screwdriver, unscrew the screws on both sides of the LCD screen.

    編集

  3. Canon PowerShot G12 LCD Screen Replacement: 手順 3、 1の画像 1

    • Remove the front plate which states the Canon brand by prying open the side farthest from the camera simply with your fingers.

    • The circuit and internal wires will be exposed.

    編集

  5. Canon PowerShot G12 LCD Screen Replacement: 手順 4、 1の画像 1

    • Flip the LCD screen vertically and remove the final screws on the outer edge of the screen with the same Phillips-head 00 screwdriver. All screws have Loctite (blue) on them so they a difficult to turn. Make sure your Phillips screw driver fits perfectly. Sometimes a new screwdriver will need to have the tip filed down a little to fit.

    • The internal mechanisms will become loose and be able to be taken out.

    編集

  6. Canon PowerShot G12 LCD Screen Replacement: 手順 5、 1の画像 1

    • Using a spudger, remove the external shell of the LCD screen leaving only the metal internal circuit board and screen attached.

    編集

  7. Canon PowerShot G12 LCD Screen Replacement: 手順 6、 1の画像 1

    • Using a pair of precision tweezers, carefully remove the yellow circuit connector from the port on the green circuit board.

    • Pull the yellow circuit connector down removing the screen from the metal shell.

    編集

  8. Canon PowerShot G12 LCD Screen Replacement: 手順 7、 1の画像 1

    • Place the new LCD screen into the metal shell with the yellow connector tab facing outward.

    • Connect the new screen with the green circuit board ensuring you use the tweezers to connect it fully into the port.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Nathan Meuwissen

メンバー登録日: 02/23/15

550 ポイント

3のガイドは作成済み

バッジ: 16

+13 個以上のバッジ

チーム

USF Tampa, Team 1-5, Leahy Winter 2015 USF Tampa, Team 1-5, Leahy Winter 2015人のメンバー

USFT-LEAHY-W15S1G5

3 メンバー

6のガイドは作成済み

2 件のコメント

ATTENTION

Connector of cable between camera and lcd board can be fit up or down side

Mark it before disconnect

Dufour - 返信

Hello!

I wanted to change the screen but it seems that camera screen differ from each other according to the country where you bought it has anyone any piece of advice ?

I bought it in Singapore but live in Europe and I’m afraid to waist money buying a European one!

Chloe a - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 28

過去 30 日: 81

今までの合計 7,690