パーツ

パーツは必要ありません。

Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera. Remove batteries.
  • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

  • Remove batteries.

コメントを追加する

Remove the three indicated .2mm screws using a Philips #00 screwdriver. Gently pull off side-panel to remove it.
  • Remove the three indicated .2mm screws using a Philips #00 screwdriver.

  • Gently pull off side-panel to remove it.

コメントを追加する

Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

コメントを追加する

Remove the indicated .2mm screw using a Philips #00 screwdriver. Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.
  • Remove the indicated .2mm screw using a Philips #00 screwdriver.

  • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Philips #00 screwdriver.

コメントを追加する

Open 'DIGITAL A/V OUT' door on camera. Remove the two indicated .2mm screws using a Philips #00 screwdriver.
  • Open 'DIGITAL A/V OUT' door on camera.

  • Remove the two indicated .2mm screws using a Philips #00 screwdriver.

コメントを追加する

Grip the sides of the top panel and gently pull to separate the top panel from the camera body.
  • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

  • The top panel will not completely detach.

コメントを追加する

Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels. Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.
  • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

  • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

コメントを追加する

Use the spudger to gently pull back the retaining clip and pull the ribbon out
  • Use the spudger to gently pull back the retaining clip and pull the ribbon out

  • The top panel should now be completely detached from the camera

  • Applying to much force to the spudger may damage the retaining clip

コメントを追加する

Remove the two screws holding down the metal frame using the Phillips #00 screwdriver
  • Remove the two screws holding down the metal frame using the Phillips #00 screwdriver

コメントを追加する

Lift up the metal frame to expose the two screws located under the trigger button.
  • Lift up the metal frame to expose the two screws located under the trigger button.

  • Remove the two screws using Phillips #00 screwdriver

コメントを追加する

Trigger button should fall out Trigger button should fall out
  • Trigger button should fall out

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Kelly Duggan

メンバー登録日: 2014年10月13日

439 ポイント

3のガイドは作成済み

チーム

Clemson, Team 2-5, Benson Fall 2014 Clemson, Team 2-5, Benson Fall 2014人のメンバー

CLEM-BENSON-F14S2G5

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 221