はじめに

Take out old, dead batteries. Then replace them with new ones.

Place the camera so the battery cover is facing up, as shown in the picture. Gently push on the outer battery cover until you hear a click, and then release.
  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

コメントを追加する

To open the inner battery cover, push down on the grey latch until you hear a click, and then release. Remove the dead batteries from the camera.
  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

コメントを追加する

After removing the batteries, insert the new batteries in the proper direction.
  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.

コメントを追加する

まとめ

Congratulations, you're done.

Ellen Chambers

メンバー登録日: 2011年01月05日

231 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 7-37, Regan Winter 2011 Cal Poly, Team 7-37, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S7G37

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 8

今までの合計 1,602