メインコンテンツにスキップ

Canon FS30 LCD Screen Replacement

必要な工具と部品

  1. Canon FS30 LCD Screen Replacement, LCD Screen: 手順 1、 2の画像 1 Canon FS30 LCD Screen Replacement, LCD Screen: 手順 1、 2の画像 2
    • Locate battery compartment cover. Turn the device over and locate the battery compartment cover.

    • Place a finger or thumb on the textured section of the battery compartment cover and push forward until you hear a click. Then lift the battery compartment cover.

  2. Canon FS30 LCD Screen Replacement: 手順 2、 2の画像 1 Canon FS30 LCD Screen Replacement: 手順 2、 2の画像 2
    • Locate the grey latch and move it aside. The battery is spring loaded and will pop up.

    • Remove the battery.

  3. Canon FS30 LCD Screen Replacement: 手順 3、 2の画像 1 Canon FS30 LCD Screen Replacement: 手順 3、 2の画像 2
    • Using the Phillips #000, remove the two screws on the LCD panel.

    • Using the Phillips #000, remove two more screws near the LCD panel swivel point.

  4. Canon FS30 LCD Screen Replacement: 手順 4、 2の画像 1 Canon FS30 LCD Screen Replacement: 手順 4、 2の画像 2
    • Use the plastic opening tool to remove the plastic cover from the LCD panel.

  5. Canon FS30 LCD Screen Replacement: 手順 5、 2の画像 1 Canon FS30 LCD Screen Replacement: 手順 5、 2の画像 2
    • Locate and remove two screws on the logic board.

    • Use the plastic opening tool to open the ZIF (zero insertion force) connector. The LCD ribbon should pop up.

  6. Canon FS30 LCD Screen Replacement: 手順 6、 2の画像 1 Canon FS30 LCD Screen Replacement: 手順 6、 2の画像 2
    • Locate the LCD screen underneath the logic board and slide it out.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Emanuel Keller

メンバー登録日: 02/28/17

419 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S1-G4, Nance Spring 2017 USF Tampa, Team S1-G4, Nance Spring 2017人のメンバー

USFT-NANCE-S17S1G4

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 17

今までの合計 327