メインコンテンツにスキップ

はじめに

Removing the memory card before performing any maintenance ensures that the memory card will not become damaged and loss of data is avoided.

ツール

パーツ

パーツは指定されていません。

  1. Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.
    • Place the camera on its side with the soft touch grip facing up and the top of the camera facing right.

  2. Slide the memory card door in the direction of the arrow engraved on the camera.
    • Slide the memory card door in the direction of the arrow engraved on the camera.

    • Once the door has slid open to its full position, lift up on the door.

  3. With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.
    • With the door open, push down the small black plunger next to the CF slot. The CF card will disengage from the slot and be ejected far enough that you can grasp it between thumb and forefinger and remove it from the slot.

    • The plunger will stay in its depressed position until a CF card is again inserted in the slot.

まとめ

To reassemble your device, follow these instructions in reverse order.

Nicholas Abate

メンバー登録日: 2015年08月28日

647 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 8-6, Eyestone Fall 2015 USF Tampa, Team 8-6, Eyestone Fall 2015人のメンバー

USFT-EYESTONE-F15S8G6

3 メンバー

9のガイドは作成済み

コメント1件

My camara wont read memory card

mcbed215 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 22

今までの合計 1,831