修理を始めるには

修理する権利

ストア

Canon EOS Rebel XS 35mm Top Cover Replacement

作成者： christiansvezia (そして 5 人のその他投稿者)
  • コメント: 0
  • お気に入り: 0

難易度

簡単

手順

4

所要時間

1 - 2 分

セクション

1

フラグ

1

Missing Details

詳細が不足

このガイドの詳細の幾つかが抜けています。工具や修理の難しさ、かかる時間など追加して他のユーザーの役に立ちましょう。

はじめに

This is a necessary procedure for replacing the top cover of the Canon EOS Rebel XS 35mm camera. This guide details both how to remove the top cover and to put it back on. These steps are required for many other procedures regarding this camera, since its top interior component houses so many parts of interest.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter. Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

    • Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

    翻訳

  2. Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

    • Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

    翻訳

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

  4. Pull off the front cover.

    • Pull off the front cover.

    翻訳

  5. Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera! Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera! Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

    • Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5他の投稿者と一緒に

christiansvezia

メンバー登録日: 2018年10月24日

1,096 ポイント

10のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

0 件のコメント

コメントを追加

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 125