Canon EOS Rebel XS 35mm Back Latch Replacement

はじめに

This is a necessary procedure for replacing the back latch of the Canon EOS Rebel XS 35mm camera. This guide details how to remove the back latch and put a back latch back on, whether it's the same back latch or a new one. The back latch covers and protects the film, among other things.

必要な工具と部品

手順1 Bottom Cover

Canon EOS Rebel XS 35mm Back Latch Replacement, Bottom Cover: 手順 1、 1の画像 1

Remove 6 screws using a PH000 Screwdriver.
Remove 1 (7mm) screw
Remove 5 (4mm) screws

翻訳

手順2

With your fingers, push on the bottom cover with a horizontal force until it clicks and separates.

翻訳

手順3

With tweezers - although you can also use your fingers - you may remove these 5 gears (shown with colored squares around them) and place them somewhere else for the time being. They fall out easily while you're working, so this will help you stay organized.

翻訳

手順4 Top Cover

Canon EOS Rebel XS 35mm Back Latch Replacement, Top Cover: 手順 4、 2の画像 1

Canon EOS Rebel XS 35mm Back Latch Replacement, Top Cover: 手順 4、 2の画像 2

Using a PH000 screwdriver bit, remove the three black screws shown in the two pictures that are all 4 mm in length and 1 mm in diameter.

翻訳

手順5

Using a Phillips #000 screwdriver, remove the two black screws shown in the picture that are both 6 mm in length and 1.25 mm in diameter.

翻訳

手順6

Pull off the front cover.

翻訳

手順7

Canon EOS Rebel XS 35mm Back Latch Replacement: 手順 7、 3の画像 3

Using an opening tool (you can also use your nails, but try not to use something potentially damaging to the camera such as metal), separate the top cover from the rest of the camera!

翻訳

手順8 Back Latch

Canon EOS Rebel XS 35mm Back Latch Replacement, Back Latch: 手順 8、 1の画像 1

Once the front, top, and bottom covers have all been removed, it's time to remove the back latch! Using a paperclip or something similar (anything that's very skinny), push on the end of the skinny, silver, metal rod that vertically travels through the camera. Do this until enough of the rod pops out on the other side for the next step.

翻訳

手順9

if you can add details to this step, Edit this step.

翻訳

手順10

if you can add details to this step, Edit this step.

翻訳

手順11

With a pair of tweezers or just your fingers, pull the rod completely out of the camera. The back latch should then completely detach from the camera.

翻訳