メインコンテンツにスキップ

はじめに

Going on a long trip, and need to take extra memory? This guide will show you how to remove and switch out your SD card.

ツール

パーツ

パーツは指定されていません。

  1. Lay the camera on its back so that the card/battery door is facing you.
    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

  2. Lift the now free card/battery door to reveal the battery compartment.
    • Lift the now free card/battery door to reveal the battery compartment.

    • Push the gray lever to the right side so that the battery can be removed and replaced with a new one.

  3. Lay the camera on its back so that the card/battery door is facing you.
    • Lay the camera on its back so that the card/battery door is facing you.

    • Using your fingernail, slide the tab on the battery door up to release the battery door latch.

  4. Open the battery compartment by lifting the card/battery door. You will see a thin SD Card slot below the battery.
    • Open the battery compartment by lifting the card/battery door. You will see a thin SD Card slot below the battery.

    • Push in the old SD card until it clicks to remove it and then push in the new card until it clicks into place.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Austin Tucker

メンバー登録日: 2015年08月27日

925 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team 16-4, Wollert Fall 2015 USF Tampa, Team 16-4, Wollert Fall 2015人のメンバー

USFT-WOLLERT-F15S16G4

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 24

今までの合計 1,563