Skip to main content

はじめに

Use this guide to replace the LCD screen on your Canon EOS Rebel T3i.

パーツ

パーツは指定されていません。

  1. Locate the battery compartment on the bottom of the camera.
    • Locate the battery compartment on the bottom of the camera.

  2. Hook your finger onto the compartment door latch.
    • Hook your finger onto the compartment door latch.

    • Open the battery compartment door.

  3. Remove the battery from the compartment.
    • Remove the battery from the compartment.

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  5. Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen. Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.
    • Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.

  6. Remove the plastic backing.
    • Remove the plastic backing.

  7. Unplug the blue cable from the back of the LCD.
    • Unplug the blue cable from the back of the LCD.

  8. Remove the two 3 mm Phillips #000 screws. Separate the LCD from the plastic housing.
    • Remove the two 3 mm Phillips #000 screws.

    • Separate the LCD from the plastic housing.

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Natalie Crock

メンバー登録日: 2015年08月27日

680 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 5-2, Blackwell Fall 2015 USF Tampa, Team 5-2, Blackwell Fall 2015人のメンバー

USFT-BLACKWELL-F15S5G2

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 22

過去 30 日: 104

今までの合計 9,013