メインコンテンツにスキップ

はじめに

The hot shoe can become worn or dented, causing the external flash to become unstable. External flash devices are very expensive, and they would most likely break if they fell off of the hot shoe while the camera being used. Replacing a bad hot shoe is a quick and easy repair the ensures that the fancy and expensive external flash you own is securely attached to your camera.

パーツ

パーツは指定されていません。

  1. Using the flat end of the spudger, carefully pry the rear part of the hot shoe baseplate upward. Pull the spudger backwards to remove the base plate. Removing this plate reveals the mounting screws for the hot shoe.
    • Using the flat end of the spudger, carefully pry the rear part of the hot shoe baseplate upward.

    • Pull the spudger backwards to remove the base plate.

    • Removing this plate reveals the mounting screws for the hot shoe.

  2. To remove the hot shoe, unscrew the 4 mounting screws holding it in place.
    • To remove the hot shoe, unscrew the 4 mounting screws holding it in place.

  3. With the screws removed, the hot shoe can now be lifted out of place.
    • With the screws removed, the hot shoe can now be lifted out of place.

まとめ

To reassemble your device, follow these instructions in reverse order. When tightening screws that hold the hot shoe in place, be very careful to not scratch the rail of the hot shoe. If the rail of the hot shoe has any scratches or dents, it can be more difficult to mount the external flash.

ある他の人がこのガイドを完成しました。

Jacob Jaskolka

メンバー登録日: 2015年03月30日

598 ポイント

4のガイドは作成済み

チーム

UMass Dartmouth, Team 1-1, Shastany Spring 2015 UMass Dartmouth, Team 1-1, Shastany Spring 2015人のメンバー

UMASSD-SHASTANY-S15S1G1

3 メンバー

4のガイドは作成済み

コメント1件

My hot shoe actually came off. I have ordered various sizes of screws to replace it but none work. I need a new hot shoe and screws. What size screws do I need with a canon rebel T2i camera?

Cindy Mitchum - 返信

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 28

今までの合計 3,191