はじめに

This guide will teach you how to remove the viewfinder from your camera.

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.
  • Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

コメントを追加する

Using your finger, peel back the textured grip so the components are separated.
  • Using your finger, peel back the textured grip so the components are separated.

コメントを追加する

  • Using the flat end of a spudger, loosen the connection between the front panel and the device.

  • Remove the front panel using your hands.

コメントを追加する

  • Turn Camera over.

  • Using a #00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws located on either side of the viewfinder.

コメントを追加する

  • Using a #00 Phillips screw driver, unscrew the one 5.7 mm Phillips screw located next to the LCD screen.

コメントを追加する

  • Lay the camera on its back.

  • Unsolder the flash connection from the motherboard as noted by the blue circle.

コメントを追加する

  • Remove the top panel by lifting it from the back, pushing it forward over the camera and letting it rotate down in front of the camera.

コメントを追加する

  • Unscrew the screws on either side of the viewfinder until the viewfinder can be lifted off

    • Two 8.5 mm Phillips screws

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Kyle Reis

メンバー登録日: 2012年04月02日

49 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 14-9, Forte Spring 2012 Cal Poly, Team 14-9, Forte Spring 2012人のメンバー

CPSU-FORTE-S12S14G9

5 メンバー

12のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,775