はじめに

This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.

パーツ

パーツは必要ありません。

  1. Remove the first set of two #00 phillips screws from the lens outer casing
    • Remove the first set of two #00 phillips screws from the lens outer casing

      • The first set of screws are located on the front and bottom of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    コメントを追加する

  2. Remove the remaining two #00 phillip screws from the lens outer casing
    • Remove the remaining two #00 phillip screws from the lens outer casing

      • The second set is located left and right side of the lens casing

      • Pull the screws out and set them aside so as not to lose them

    コメントを追加する

    • Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.

    コメントを追加する

    • Remove the four #00 phillips screws from the SLR Lens Mount

    コメントを追加する

    • After the screws have been removed, pull the SLR Lens Mount away from the body of the camera

    • Be aware that a pin will fall out when the SLR Lens Mount is removed.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Joe Blumberg

メンバー登録日: 2011年10月04日

150 ポイント

1ガイドが承認済み

チーム

UW Stout, Team 5-1, Zhou Fall 2011 UW Stout, Team 5-1, Zhou Fall 2011人のメンバー

UWSTOUT-ZHOU-F11S5G1

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 5

過去 7 日: 20

過去 30 日: 70

今までの合計 7,971