修理を始めるには コミュニティ ストア

Cambridge Audio A3i Power Cord and Transformer Replacement

はじめに

In this guide we will replace the power cord and the transformer The transformer is the large, heavy device that converts the relatively high 220V input voltage into a lower voltage for the amplifier.

必要な工具と部品

  1. Cambridge Audio A3i Power Cord and Transformer Replacement, Case: 手順 1、 1の画像 1

    • Remove 2 screws from each side of the amplifier.

    編集

  2. Cambridge Audio A3i Power Cord and Transformer Replacement: 手順 2、 1の画像 1

    • Remove 2 screws on rear of device. Slide top cover up and back from main case.

    編集

  4. Cambridge Audio A3i Power Cord and Transformer Replacement: 手順 3、 2の画像 1 Cambridge Audio A3i Power Cord and Transformer Replacement: 手順 3、 2の画像 2

    • Remove 3 screws on bottom of case.

    • Remove 13 screws on rear panel.

    • Do not move the rear panel too far, as the power cord is still connected.

    編集

  5. Cambridge Audio A3i Power Cord and Transformer Replacement: 手順 4、 1の画像 1

    • Using a pair of pliers, squeeze the retainer for the power cord as shown and pull it toward the external side the panel.

    • It may require some wiggling, but it should slip out of the hole and then off of the cord.

    編集

  6. Cambridge Audio A3i Power Cord and Transformer Replacement, Power Cord and Transformer: 手順 5、 1の画像 1

    • Carefully de-solder ends of power cord from circuit board.

    • Keep track of the colors of the cords. The brown cord leads to the L on the circuit board, and this cord will lead to a fuse in the power plug. The blue cord leads to the N on the board.

    • Finally, pull the power cord through the rear panel to completely remove it.

    編集

  7. Cambridge Audio A3i Power Cord and Transformer Replacement: 手順 6、 1の画像 1

    • To remove the transformer the motherboard must be removed. This is to gain access to the solder on the power cords. -See guide for removing motherboard.

    • Remove the 4 nuts holding down the transformer bracket using a 7mm nut driver or socket.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Colby

メンバー登録日: 04/15/10

338 ポイント

3のガイドは作成済み

バッジ: 10

+7 個以上のバッジ

チーム

Cal Poly, Team 28-36, Regan Spring 2010 Cal Poly, Team 28-36, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S28G36

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 19

今までの合計 7,128