メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Bush Pump Head and Handle Replacement

  1. Bush Pump Head and Handle Replacement, Head and Handle: 手順 1、 2の画像 1 Bush Pump Head and Handle Replacement, Head and Handle: 手順 1、 2の画像 2
    • Test pump performance by pumping 40 strokes.

    • An effective pump should return at least 10 liters.

  2. Bush Pump Head and Handle Replacement: 手順 2、 2の画像 1 Bush Pump Head and Handle Replacement: 手順 2、 2の画像 2
    • Remove the two pins connecting the handle to the slider.

  3. Bush Pump Head and Handle Replacement: 手順 3、 2の画像 1 Bush Pump Head and Handle Replacement: 手順 3、 2の画像 2
    • Pull the two lever arms away from the slider.

  4. Bush Pump Head and Handle Replacement: 手順 4、 2の画像 1 Bush Pump Head and Handle Replacement: 手順 4、 2の画像 2
    • Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

  5. Bush Pump Head and Handle Replacement: 手順 5、 3の画像 1 Bush Pump Head and Handle Replacement: 手順 5、 3の画像 2 Bush Pump Head and Handle Replacement: 手順 5、 3の画像 3
    • Throughout this step, make sure you support the handle and head with at least three hands.

    • Slide the bearing rod out of the head.

    • Inspect the bearing rod and head for any wear or tear.

  6. Bush Pump Head and Handle Replacement: 手順 6、 1の画像 1
    • Remove the head and handle, and place them on a clean surface to prevent contamination.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Jake Devincenzi

メンバー登録日: 04/18/11

117,225 ポイント

57のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 163