はじめに

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.
  • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

コメントを追加する

Once the label maker is open, remove the six AAA drained batteries.
  • Once the label maker is open, remove the six AAA drained batteries.

  • If your using an AC adapter, replace the old one with the new HQRP adapter.

  • If you see white on the batteries, that would be corrosion. Be careful when disposing.

コメントを追加する

Now place in the new six AAA batteries. Make sure the batteries are correctly in and touching the golden prongs. Make sure the batteries are correctly in and touching the golden prongs.
  • Now place in the new six AAA batteries.

  • Make sure the batteries are correctly in and touching the golden prongs.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

メンバー登録日: 2014年10月25日

301 ポイント

3のガイドは作成済み

チーム

Gateway, Team 1-4, Johnson Fall 2014 Gateway, Team 1-4, Johnson Fall 2014人のメンバー

GCC-JOHNSON-F14S1G4

3 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 294