Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.
  • Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.

コメントを追加する

Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.
  • Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.

  • Insert tape cassette into the red marked area as shown in the picture.

  • Make sure the cassette snaps into place by applying a small amount of pressure.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Haley Sweet

メンバー登録日: 2014年10月30日

425 ポイント

4のガイドは作成済み

チーム

Baylor, Team 4-4, Williams Fall 2014 Baylor, Team 4-4, Williams Fall 2014人のメンバー

BU-WILLIAMS-F14S4G4

4 メンバー

4のガイドは作成済み

So if you've replaced the cassette and it still won't print now what??

Sara Mullaney - 返信

This was supposed to help with model PT-450D which looks nothing like this. Please help. I can’t REMOVE / replace the cassette !!! It is STUCK inside the label printer!

af4k - 返信

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 9

過去 30 日: 42

今までの合計 1,669