この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。
はじめに
Many functions, including the LCD screen dial pad and device functions can wear and no longer work and may need to be replaced.
必要な工具と部品
-
-
Unscrew these three 12.1mm screws holding the control panel in place.
-
-
-
-
Lift up the front panel from the device.
-
Gently lift up and pull out the data cables that attach the panel to the printer.
-
To reassemble the front panel, follow these instructions in reverse order.
To reassemble the front panel, follow these instructions in reverse order.
2 の人々がこのガイドを完成させました。
コメント 1 件
Be sure the three plastic tabs on the bottom of the black front cover are inserted fully when you snap the cover back into place or else you will get a message saying the ink door is not closed.