Brother HL-L2400D Drum Replacement

はじめに

If your Brother HL-L2400D printer produces faded prints, streaks, or error messages indicating that the drum needs replacement, it’s time for a new drum unit. The drum is a critical component that transfers toner onto paper; over time, it wears out and affects print quality.

This guide will walk you through the step-by-step process of replacing the drum in your Brother HL-L2400D, ensuring smooth operation and high-quality prints. Whether you’re a beginner or experienced with printer maintenance, our instructions will make the process quick and hassle-free.

Let’s get started!

手順1 Drum

Brother HL-L2400D Drum Replacement, Drum: 手順 1、 2の画像 1

Brother HL-L2400D Drum Replacement, Drum: 手順 1、 2の画像 2

Open the front cover of the printer.
Turn off the printer and let it cool down for 10 minutes.

編集

手順2

Grab the green tab and pull the part out.

編集

手順3

Brother HL-L2400D Drum Replacement: 手順 3、 3の画像 3

Place the drum onto a sheet of paper.
Press the green tab on the side to pop out the inside component.

編集

手順4

Press the green tab firmly until you hear a noise.
Pull out the drum using the closest grey part to you.

編集

手順5

Brother HL-L2400D Drum Replacement: 手順 5、 3の画像 3

Place your new replacement drum inside.
Press the new drum firmly.
The green tab must look like the second and third images to tell that it is properly inserted.

編集

手順6

Brother HL-L2400D Drum Replacement: 手順 6、 3の画像 3

To clean the imaging of the drum, use the slider above.
Make sure to go back and forth with the slider several times.

編集

手順7

Place your replaced part back into the printer.
Press and hold the "Go" button at the bottom of the printer.
Let go once all four of the button's LEDs are lit up.

編集

終わりに

You have successfully replaced the drum! Contact a local recycling centre or a specialized recycling service for instructions on properly disposing of the cartridge or drum unit.

3 の人々がこのガイドを完成させました。