はじめに

Replacing the spring should it fail to work.

Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver. Reminder for reassembly; This bottom piece is first to be screwed back on. Reminder for reassembly; This bottom piece is first to be screwed back on.
  • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

  • Reminder for reassembly; This bottom piece is first to be screwed back on.

コメントを追加する

Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

コメントを追加する

Remove the grey plastic casing. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver. Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.
  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

コメントを追加する

Identify the spring and the hook its attached to.
  • Identify the spring and the hook its attached to.

  • Carefully remove the spring.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Antonio

メンバー登録日: 2012年09月26日

73 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 1-3, Propen Fall 2012 Cal Poly, Team 1-3, Propen Fall 2012人のメンバー

CPSU-PROPEN-F12S1G3

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 8

今までの合計 1,221