メインコンテンツにスキップ

Bose Soundlink Revolve Top Circuit Board Replacement

必要な工具と部品

  1. Bose Soundlink Revolve Top Circuit Board Replacement, Bottom Circuit Board Access: 手順 1、 2の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement, Bottom Circuit Board Access: 手順 1、 2の画像 2
    • Flip speaker over so that the bottom is facing up.

    • Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.

  2. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 2、 3の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 2、 3の画像 2 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 2、 3の画像 3
    • Using the screwdriver, unscrew three screws.

    • Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.

  3. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 3、 2の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 3、 2の画像 2
    • Remove the screw that is above the charging port.

  4. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 4、 2の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 4、 2の画像 2
    • Remove the two screws connecting the motherboard to the bottom cover of the speaker.

    • Remove the bottom cover.

  5. Bose Soundlink Revolve Top Circuit Board Replacement, Top Circuit Board: 手順 5、 1の画像 1
    • Using your hands, grip and separate the soft plastic and the metal casing away from each other with some small force.

  6. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 6、 1の画像 1
    • Remove the (4) four screws shown around the top of the inside.

    • (2) two of the screws are shown here, the other side will look the same.

  7. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 7、 2の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 7、 2の画像 2
    • Pry up and remove the soft plastic casing from the rest of the device.

  8. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 8、 2の画像 1 Bose Soundlink Revolve Top Circuit Board Replacement: 手順 8、 2の画像 2
    • Remove the 3 screws holding down the top circuit board.

  9. Bose Soundlink Revolve Top Circuit Board Replacement: 手順 9、 1の画像 1
    • Lift up and look on the underside of the circuit board.

    • Using the plastic opening tool, pry open the wide clamp keeping a ribbon to the top circuit board. The top circuit board can now freely be removed from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

10 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Brian Butner

メンバー登録日: 09/27/17

804 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team S6-G2, Remmell Fall 2017 USF Tampa, Team S6-G2, Remmell Fall 2017人のメンバー

USFT-REMMELL-F17S6G2

4 メンバー

4のガイドは作成済み

12 件のコメント

Hello,

I need to buy the TOP CIRCUIT BOARD … Where Can I buy it or could you sell me one ? Thank you my mail is skelet300@gmail.com

skelet300 - 返信

I also need one of these boards and don’t really want to buy a complete used unit to repair mine, copydoc1@aol.com if you know of any resources, thanks in advance.

Jeff Pitt - 返信

Same here. My speaker had one circuit replacement on warranty but now need a second replacement and I not willing to pay half the price of a new speaker each a every year. Can you help please ?

My e-mail is fmtbmp@gmail.com

fmpitschieller - 返信

Hi, I need to buy the top and bottom circuit board and was wondering the same. Any help with where to purchase these would be appreciated,

Thanks, my email is fayclaybrook28@outlook.com

Fay Claybrook - 返信

I am also looking for a top circuit board replacement. Where can I get one. michael@parsche.net

Michael Parsche - 返信

コメントを追加

統計データ:

過去 24時間: 4

過去 7 日: 19

過去 30 日: 88

今までの合計 12,856