メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

  1. Remove the two T-10 machine screws at the bottom of the device.
    • Remove the two T-10 machine screws at the bottom of the device.

  2. Turn the device around.
    • Turn the device around.

    • From the top, lightly push down the back cover to release it.

    • Lift the bottom of the cover and pull it up.

  3. Remove the two T-10 machine screws, then pull the battery straight out.
    • Remove the two T-10 machine screws, then pull the battery straight out.

  4. Remove the two screws holding the speaker grille in place.
    • Remove the two screws holding the speaker grille in place.

  5. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  6. Grip the sides of the device and push the speaker grille down and out.
    • Grip the sides of the device and push the speaker grille down and out.

  7. Gently release the ribbon from its connector and remove the grille.
    • Gently release the ribbon from its connector and remove the grille.

  8. Remove the two screws using a torx screwdriver.
    • Remove the two screws using a torx screwdriver.

  9. With the bottom of the device facing you, pull down the trim pieces to remove from the device body.
    • With the bottom of the device facing you, pull down the trim pieces to remove from the device body.

  10. Separate the case that holds the subwoofer in place. Be careful when doing this step because there are several connectors inside.
    • Separate the case that holds the subwoofer in place.

    • Be careful when doing this step because there are several connectors inside.

  11. Gently pull on the connectors at the circuit board to remove.  Remove the screws from the circuit board and set the board aside.
    • Gently pull on the connectors at the circuit board to remove. Remove the screws from the circuit board and set the board aside.

  12. Remove the four screws from the subwoofer and lift it out of the casing. Remove the four screws from the subwoofer and lift it out of the casing. Remove the four screws from the subwoofer and lift it out of the casing.
    • Remove the four screws from the subwoofer and lift it out of the casing.

終わりに

To reassemble your device, follow these instructions in reverse order.

Chelsea Martin

メンバー登録日: 2017年02月20日

679 ポイント

6のガイドは作成済み

チーム

USF Tampa, Team S1-G3, Leahy Spring 2017 USF Tampa, Team S1-G3, Leahy Spring 2017人のメンバー

USFT-LEAHY-S17S1G3

3 メンバー

9のガイドは作成済み

2 件のコメント

Thanks a lot for sharing your incredible ideas. It is an appreciated and pretty tip for all those music lovers. What a Fatal post for those who want to upgrade an existing subwoofer with a new one.

About more: www.outdoorsumo.com

Outdoor Sumo - 返信

Thanks a lot for sharing your incredible ideas. It is an appreciated and pretty tip for all those music lovers.

About more: ++https://compactcarsubwoofer.blogspot.com...

Outdoor Sumo - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 6

今までの合計 908