修理を始めるには コミュニティ ストア

Blu Studio HD 6.0 MicroSD Card Replacement

はじめに

Installing a Micro-SD card is a quick and easy way to expand your device's storage. Follow this guide to install your Micro-SD card correctly.

必要な工具と部品

  1. Blu Studio HD 6.0 MicroSD Card Replacement, Rear Case: 手順 1、 1の画像 1

    • Begin by making sure your Blu Studio is turned off.

    編集

  2. Blu Studio HD 6.0 MicroSD Card Replacement, Back Panel.: 手順 2、 2の画像 1 Blu Studio HD 6.0 MicroSD Card Replacement, Back Panel.: 手順 2、 2の画像 2

    • To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

    編集

  4. Blu Studio HD 6.0 MicroSD Card Replacement: 手順 3、 2の画像 1 Blu Studio HD 6.0 MicroSD Card Replacement: 手順 3、 2の画像 2

    • Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.

    • Your rear panel should be placed nearby and in a safe location until you are finished with your task.

    編集

  5. Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: 手順 4、 3の画像 1 Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: 手順 4、 3の画像 2 Blu Studio HD 6.0 MicroSD Card Replacement, Insert the Micro-SD Card: 手順 4、 3の画像 3

    • Find the Micro-SD card slot which is under the right SIM card slot.

    • Line up the gold pins of the Micro-SD card with the pins of the card slot. If pins in the slot are hidden, then insert the Micro-SD card with the "MicroSD" print up and the pins facing the slot.

    • Slide the card into the slot until you either hear a clicking noise or until the card does not move anymore. Do not apply too much force; gently slide it in and stop immediately when it does not move anymore.

    編集

  6. Blu Studio HD 6.0 MicroSD Card Replacement, Turn the phone on: 手順 5、 1の画像 1

    • Your phone should boot up and ask you to format your Micro-SD Card.

    • Format the card and you're good to go.

    • If your phone does not recognize the card, ensure that the gold pins of the card aligned with the gold pins on the phone's Micro-SD slot.

    • If the card is installed correctly, the card may be faulty. If so contact the Micro-SD card manufacturer.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Alec

メンバー登録日: 09/23/14

617 ポイント

2のガイドは作成済み

バッジ: 16

+13 個以上のバッジ

チーム

USF Tampa, Team 9-1, Blackwell Fall 2014 USF Tampa, Team 9-1, Blackwell Fall 2014人のメンバー

USFT-BLACKWELL-F14S9G1

3 メンバー

8のガイドは作成済み

コメント 1 件

Very clear instructions and step by step guidance

Laszlo Tihanyi - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 16,294