修理を始めるには コミュニティ ストア

Blackberry Curve 8330 Track Ball Replacement

必要な工具と部品

  1. Blackberry Curve 8330 Track Ball Replacement, Remove Back Cover: 手順 1、 1の画像 1

    • We did not have an actual back cover or battery for the phone we were given. Therefore, the first couple of steps will be without pictures.

    • Hold the phone with the back side facing you.

    • Press down on the silver tab towards the bottom end of the phone.

    • Carefully lift up the back casing to reveal the battery.

    翻訳

  2. Blackberry Curve 8330 Track Ball Replacement, Remove Battery: 手順 2、 1の画像 1

    • Put your finger on the top left corner of the battery and lift the battery up and out of its housing.

    • The phone should now look like this.

    翻訳

  3. Blackberry Curve 8330 Track Ball Replacement, Keyboard: 手順 3、 1の画像 1

    • Remove the two top screws using a T5 Torx screwdriver.

    翻訳

  5. Blackberry Curve 8330 Track Ball Replacement: 手順 4、 2の画像 1 Blackberry Curve 8330 Track Ball Replacement: 手順 4、 2の画像 2

    • Use a plastic opening tool to pry the edges of the bottom cover until it snaps loose.

    • The cover will now pull off easily.

    翻訳

  6. Blackberry Curve 8330 Track Ball Replacement: 手順 5、 2の画像 1 Blackberry Curve 8330 Track Ball Replacement: 手順 5、 2の画像 2

    • Use a plastic opening tool to pry between the front and back cover.

    • Start prying from wherever it is easiest to separate the silver and black plastic of the covers.

    • There are 5 securing clips on the front panel to disconnect.

    • Pry gently to prevent breaking the plastic clips when removing the front panel.

    • Once all the clips have been freed, the front cover will lift away from the phone.

    翻訳

  7. Blackberry Curve 8330 Track Ball Replacement: 手順 6、 1の画像 1

    • Lift the flexible keypad away from the device. It should come off easily.

    翻訳

  8. Blackberry Curve 8330 Track Ball Replacement: 手順 7、 2の画像 1 Blackberry Curve 8330 Track Ball Replacement: 手順 7、 2の画像 2

    • Use a T6 Torx Screwdriver to remove the four corner screws on the keyboard's housing.

    • Lift the keyboard frame away from the device.

    • There may be a small amount of adhesive at the bottom of the frame that needs to be pulled away.

    翻訳

  9. Blackberry Curve 8330 Track Ball Replacement, Track Ball: 手順 8、 1の画像 1

    • Use a plastic opening tool to pry the trackball housing from the keyboard housing.

    翻訳

  10. Blackberry Curve 8330 Track Ball Replacement: 手順 9、 1の画像 1

    • Remove the trackball from the silver trackball housing by hand.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Nhan Le

メンバー登録日: 04/03/12

27 ポイント

1ガイドが承認済み

バッジ: 4

+1 以上のバッジ

チーム

Cal Poly, Team 14-11, Forte Spring 2012 Cal Poly, Team 14-11, Forte Spring 2012人のメンバー

CPSU-FORTE-S12S14G11

5 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 5,312