はじめに

This guide outlines how to remove the battery connector from the device.

With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
  • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

コメントを追加する

Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
  • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

コメントを追加する

Remove the battery by pushing against it from the right and then pulling towards you.
  • Remove the battery by pushing against it from the right and then pulling towards you.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.
  • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

コメントを追加する

Use a plastic opening tool or your fingernails to remove the plastic backing. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.
  • Use a plastic opening tool or your fingernails to remove the plastic backing.

  • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

コメントを追加する

Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.
  • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

  • Place the four screws released from the phone in a plastic bag.

コメントを追加する

The black battery casing and logic board can now be separated for the following steps.
  • The black battery casing and logic board can now be separated for the following steps.

コメントを追加する

With the speaker facing you, place your fingers on the gold battery connector.
  • With the speaker facing you, place your fingers on the gold battery connector.

  • Pull upwards and release the battery connector from the black body piece.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

kelogan

メンバー登録日: 2009年11月04日

1 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 9-17, Regan Fall 2009 Cal Poly, Team 9-17, Regan Fall 2009人のメンバー

CPSU-REGAN-F09S9G17

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 3,160