メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Work area should be lint free, clean and well lit.

パーツ

パーツは指定されていません。

  1. Open the rear panel to expose the battery and the chassis assembly. Remove the battery.
    • Open the rear panel to expose the battery and the chassis assembly. Remove the battery.

  2. Use a small, non-marring plastic opening tool  to remove the lower-rear cover. (Credit cards and guitar picks work great.)
    • Use a small, non-marring plastic opening tool to remove the lower-rear cover. (Credit cards and guitar picks work great.)

  3. Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown.
    • Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown.

    • Flip the phone over to the front and remove the plastic bezel.

  4. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  5. Remove the midframe from the back of the phone, which should now be free after removing the screws.  The green motherboard should now be exposed.
    • Remove the midframe from the back of the phone, which should now be free after removing the screws. The green motherboard should now be exposed.

  6. Remove the front-cover by carefully prying the side release tabs, located on the side of the phone.
    • Remove the front-cover by carefully prying the side release tabs, located on the side of the phone.

  7. Gently pry the side release tabs to lift the flexing keypad from the frame. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.
    • Gently pry the side release tabs to lift the flexing keypad from the frame.

    • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

  8. Gently lift the motherboard.
    • Gently lift the motherboard.

    • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

  9. Carefully pry at the sides of the screen until the display assembly is free.  Remove the display from the motherboard unit. Carefully pry at the sides of the screen until the display assembly is free.  Remove the display from the motherboard unit.
    • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Renae Bishop

メンバー登録日: 2011年09月07日

68 ポイント

4のガイドは作成済み

チーム

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011人のメンバー

CUESTA-ZIPPERIAN-F11S1G3

3 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 4,118