はじめに

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

パーツ

パーツは必要ありません。

Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone. Set the cover aside.  The battery will now be exposed.
  • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

  • Set the cover aside. The battery will now be exposed.

コメントを追加する

Remove the battery by pulling back on the notch on top edge of the battery. Set the battery aside.
  • Remove the battery by pulling back on the notch on top edge of the battery.

  • Set the battery aside.

コメントを追加する

MacBook Battery Fix Kits
Fix Kits Starting at $69.99
MacBook Battery Fix Kits
Starting at $69.99
Unscrew and remove all four T6 Torx screws.
  • Unscrew and remove all four T6 Torx screws.

コメントを追加する

Pull the back cover of the phone off and set it aside. Pull the back cover of the phone off and set it aside.
  • Pull the back cover of the phone off and set it aside.

コメントを追加する

Unscrew and remove all 4 T6 Torx screws. Unscrew and remove all 4 T6 Torx screws.
  • Unscrew and remove all 4 T6 Torx screws.

コメントを追加する

Lift and remove inner back cover and set aside. A small side piece may fall away but is simple to reattach. Remove logic board by gently lifting it off of the front cover of the phone.
  • Lift and remove inner back cover and set aside.

    • A small side piece may fall away but is simple to reattach.

  • Remove logic board by gently lifting it off of the front cover of the phone.

    • New logic board can now simply be set in place.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

arlebrun

メンバー登録日: 2009年12月02日

1 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 18-4, Maness Fall 2009 Cal Poly, Team 18-4, Maness Fall 2009人のメンバー

CPSU-MANESS-F09S18G4

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 3,085