はじめに

This guide shows how to replace the BlackBerry 7100g external housing case.

Turn over your BalckBerry 7100g so that the back cover is facing up.
  • Turn over your BalckBerry 7100g so that the back cover is facing up.

  • Locate the battery cover release button near the bottom of the back panel.

コメントを追加する

Push down on the release button with one thumb. Slide the battery cover off with the other thumb. Slide the battery cover off with the other thumb.
  • Push down on the release button with one thumb.

  • Slide the battery cover off with the other thumb.

コメントを追加する

Remove the battery from the battery housing by flipping up the top of the battery.
  • Remove the battery from the battery housing by flipping up the top of the battery.

コメントを追加する

Locate the silver strip near the top of your BlackBerry. Use a plastic opening tool to pry off the edge of the silver lining. Slide the tool along the length of the silver strip to completely remove it.
  • Locate the silver strip near the top of your BlackBerry.

  • Use a plastic opening tool to pry off the edge of the silver lining.

  • Slide the tool along the length of the silver strip to completely remove it.

コメントを追加する

Do not lose the screws. They are quite small and can easily be misplaced. Locate and unscrew the four (4) screws using a T6 screwdriver.
  • Do not lose the screws. They are quite small and can easily be misplaced.

  • Locate and unscrew the four (4) screws using a T6 screwdriver.

コメントを追加する

The keypad cover may fall out of the housing when prying the housing apart. Tightly pinch the top of the front and back halves of the housing. Carefully pry the two halves of the housing apart.
  • The keypad cover may fall out of the housing when prying the housing apart.

  • Tightly pinch the top of the front and back halves of the housing.

  • Carefully pry the two halves of the housing apart.

コメントを追加する

You can now easily remove the "guts" of the phone from the housing.
  • You can now easily remove the "guts" of the phone from the housing.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Kellen

メンバー登録日: 2010年03月30日

262 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 25-87, Amido Spring 2010 Cal Poly, Team 25-87, Amido Spring 2010人のメンバー

CPSU-AMIDO-S10S25G87

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,120