修理を始めるには コミュニティ ストア

Black and Decker WP900 Motor Replacement

はじめに

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to the point where the motor can be fully removed and replaced.

必要な工具と部品

  1. Black and Decker WP900 Motor Replacement, Motor: 手順 1、 1の画像 1

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    翻訳

  2. Black and Decker WP900 Motor Replacement: 手順 2、 1の画像 1

    • Using the Philips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    翻訳

  3. Black and Decker WP900 Motor Replacement: 手順 3、 3の画像 1 Black and Decker WP900 Motor Replacement: 手順 3、 3の画像 2 Black and Decker WP900 Motor Replacement: 手順 3、 3の画像 3

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    翻訳

  5. Black and Decker WP900 Motor Replacement: 手順 4、 1の画像 1

    • Loosen the power cord and control panel. Using the Phillips #1 screwdriver, remove two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    翻訳

  6. Black and Decker WP900 Motor Replacement: 手順 5、 2の画像 1 Black and Decker WP900 Motor Replacement: 手順 5、 2の画像 2

    • Gently pull the power cord out from the control module.

    • Remember, when you're reassembling the device, the black wire should be on the top.

    翻訳

  7. Black and Decker WP900 Motor Replacement: 手順 6、 1の画像 1

    • Firmly grasping the motor, dislodge the internal components from the frontal external casing.

    • Switch and control panel are attached to the motor.

    翻訳

  8. Black and Decker WP900 Motor Replacement: 手順 7、 2の画像 1 Black and Decker WP900 Motor Replacement: 手順 7、 2の画像 2

    • Using a Phillips #1 screwdriver, remove the two 22mm screws securing the brush assembly to the motor.

    翻訳

  9. Black and Decker WP900 Motor Replacement: 手順 8、 2の画像 1 Black and Decker WP900 Motor Replacement: 手順 8、 2の画像 2

    • To fully remove the brush assembly from the motor, push the brushes (enclosed in the gold ribbing) outward and pull up.

    翻訳

  10. Black and Decker WP900 Motor Replacement: 手順 9、 1の画像 1

    • With a large amount of force, pull the motor up and off of the wire coil.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Stefan Wolowec

メンバー登録日: 02/15/16

128 ポイント

1ガイドが承認済み

バッジ: 7

+4 個以上のバッジ

チーム

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016人のメンバー

IUPUI-WILSON-S16S8G8

4 メンバー

4のガイドは作成済み

コメント 1 件

Very straightforward tutotial. We are writing review of this product here https://www.helpful.reviews/en/product/4.... However we have not found many cases among owners of this product that they would need to repair motor by its replacement.

John Bazmek - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 19

今までの合計 2,267