修理を始めるには コミュニティ ストア

Black and Decker WP900 Exterior Casing Replacement

はじめに

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to where the external casing can be removed from all internal workings.

必要な工具と部品

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: 手順 1、 1の画像 1

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    編集

  2. Black and Decker WP900 Exterior Casing Replacement: 手順 2、 1の画像 1

    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    編集

  4. Black and Decker WP900 Exterior Casing Replacement: 手順 3、 3の画像 1 Black and Decker WP900 Exterior Casing Replacement: 手順 3、 3の画像 2 Black and Decker WP900 Exterior Casing Replacement: 手順 3、 3の画像 3

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    編集

  5. Black and Decker WP900 Exterior Casing Replacement: 手順 4、 1の画像 1

    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    編集

  6. Black and Decker WP900 Exterior Casing Replacement: 手順 5、 2の画像 1 Black and Decker WP900 Exterior Casing Replacement: 手順 5、 2の画像 2

    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

    編集

  7. Black and Decker WP900 Exterior Casing Replacement: 手順 6、 1の画像 1

    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

David Hutchings

メンバー登録日: 03/28/16

101 ポイント

1ガイドが承認済み

バッジ: 2

チーム

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016人のメンバー

IUPUI-WILSON-S16S8G8

4 メンバー

4のガイドは作成済み

コメント 1 件

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 7

過去 30 日: 14

今までの合計 887