修理を始めるには コミュニティ ストア

Black and Decker TR1278B Bread Grabber Spring Replacement

はじめに

This is a replacement guide for the bread grabber springs on the Black and Decker TR1278B.

必要な工具と部品

  1. Black and Decker TR1278B Bread Grabber Spring Replacement, Top Cover: 手順 1、 1の画像 1

    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

    編集

  2. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 2、 1の画像 1

    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Or a slightly different model has six screws that require an allen wrench (hex key). Ones that have a ball end will not work. I had to use one that had more of a Star of David, pointy pattern to it.

    編集

  3. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 3、 1の画像 1

    • Detach the bottom from the front cover using the plastic opening tool.

    編集

  5. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 4、 1の画像 1

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    編集

  6. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 5、 1の画像 1

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    編集

  7. Black and Decker TR1278B Bread Grabber Spring Replacement, Bread Grabber Spring: 手順 6、 1の画像 1

    • Locate the spring

    編集

  8. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 7、 1の画像 1

    • Press down on the toaster lever to gain access to the grabber spring located behind the large metal plate.

    • Use metal spudger to loosen clamps on spring.

    編集

  9. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 8、 1の画像 1

    • Use needle nose tweezers to pull the spring off of its hook.

    • Repeat this step for the opposite side.

    編集

  10. Black and Decker TR1278B Bread Grabber Spring Replacement: 手順 9、 1の画像 1

    • Remove the old spring from the toaster unit to insert the new one.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Brea-Monique

メンバー登録日: 02/15/17

351 ポイント

3のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

USF Tampa, Team 8-1, Eyestone Spring 2017 USF Tampa, Team 8-1, Eyestone Spring 2017人のメンバー

USFT-EYESTONE-S17S8G1

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 11

今までの合計 1,183