メインコンテンツにスキップ

Black and Decker PS1800 Chuck Replacement

必要な工具と部品

  1. Black and Decker PS1800 Chuck Replacement, Chuck: 手順 1、 2の画像 1 Black and Decker PS1800 Chuck Replacement, Chuck: 手順 1、 2の画像 2
    • Using the T20 Torx Security screwdriver, take out the 2.3 mm screw inside the chuck.

  2. Black and Decker PS1800 Chuck Replacement: 手順 2、 2の画像 1 Black and Decker PS1800 Chuck Replacement: 手順 2、 2の画像 2
    • Set the drill to 'drill mode' and tighten the chuck with the Allen wrench in it.

    • 'Drill mode' is represented by the drill bit symbol

    • Use the Allen wrench to unscrew the chuck by rotating it counter clockwise.

  3. Black and Decker PS1800 Chuck Replacement: 手順 3、 1の画像 1
    • Remove the chuck completely by unscrewing it in a counter clockwise direction.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

David Nawl

メンバー登録日: 10/19/16

237 ポイント

2のガイドは作成済み

チーム

IUPUI, Team 2-3, Baechle Fall 2016 IUPUI, Team 2-3, Baechle Fall 2016人のメンバー

IUPUI-BAECHLE-F16S2G3

5 メンバー

6のガイドは作成済み

コメント 1 件

Is the torx screw right or left hand thread

andrewaporter - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 7

今までの合計 2,713