メインコンテンツにスキップ

Black and Decker PHV1810 Motor Replacement

必要な工具と部品

  1. Black and Decker PHV1810 Motor Replacement, Nozzle, Filter, and Catch Bowl: 手順 1、 2の画像 1 Black and Decker PHV1810 Motor Replacement, Nozzle, Filter, and Catch Bowl: 手順 1、 2の画像 2
    • To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.

  2. Black and Decker PHV1810 Motor Replacement: 手順 2、 2の画像 1 Black and Decker PHV1810 Motor Replacement: 手順 2、 2の画像 2
    • Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.

  3. Black and Decker PHV1810 Motor Replacement, Motor: 手順 3、 2の画像 1 Black and Decker PHV1810 Motor Replacement, Motor: 手順 3、 2の画像 2
    • Remove the three screws.

  4. Black and Decker PHV1810 Motor Replacement: 手順 4、 2の画像 1 Black and Decker PHV1810 Motor Replacement: 手順 4、 2の画像 2
    • Flip the hand vac over and remove two screws.

  5. Black and Decker PHV1810 Motor Replacement: 手順 5、 3の画像 1 Black and Decker PHV1810 Motor Replacement: 手順 5、 3の画像 2 Black and Decker PHV1810 Motor Replacement: 手順 5、 3の画像 3
    • Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.

    • Remove the L-shaped plastic hook.

    • Once the L shaped hook has been removed the motor will easily fall out of place.

    • Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.

    • This will then allow for you to replace the motor.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Cade Bennett

メンバー登録日: 09/24/18

209 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 447