Black and Decker 15.6V Filter Replacement - iFixit 修理ガイド

はじめに

Getting to the air filter of a Black and Decker Dust-buster is fairly simple. It is a tool-less process, that can be completed in a short time. Despite the simplicity of this procedure, it is imperative that a user either replaces or cleans the dust filter regularly. This act of replacing the filter will keep the unit functioning at its max capacity, as well as prevent excess wear on the vacuums components.

必要な工具と部品

手順1 Filter Unit Replacement

Black and Decker 15.6V Filter Replacement, Filter Unit Replacement: 手順 1、 2の画像 1

Black and Decker 15.6V Filter Replacement, Filter Unit Replacement: 手順 1、 2の画像 2

Disconnect the vacuum's nozzle by pressing the blue buttons on the side of the nozzle.

手順2

Black and Decker 15.6V Filter Replacement: 手順 2、 2の画像 1

Black and Decker 15.6V Filter Replacement: 手順 2、 2の画像 2

Disconnect the dustbin from the rest of the vacuum by pressing the blue button on the vacuum's handle.

手順3

Black and Decker 15.6V Filter Replacement: 手順 3、 2の画像 1

Black and Decker 15.6V Filter Replacement: 手順 3、 2の画像 2

Remove the entire dustbin.
Empty the bin into a trash can if it has debris.
Pull the filter unit out from the bottom of the dustbin.

手順4

Black and Decker 15.6V Filter Replacement: 手順 4、 3の画像 1

Black and Decker 15.6V Filter Replacement: 手順 4、 3の画像 2

Black and Decker 15.6V Filter Replacement: 手順 4、 3の画像 3

With the filter unit in your hand give the dark grey plastic shroud a quarter clockwise turn and remove the shroud exposing the filter.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Jordon Borges

メンバー登録日: 03/06/17

1,053 ポイント

2のガイドは作成済み

+10 個以上のバッジ

チーム

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 UMass Dartmouth, Team S6-G1, Isaacson Spring 2017人のメンバー

UMASSD-ISAACSON-S17S6G1

4 メンバー

9のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 2

過去 7 日: 3

過去 30 日: 17

今までの合計 1,600