メインコンテンツにスキップ

Bissell Pet Hair Eraser Vacuum Motor Replacement

必要な工具と部品

  1. Bissell Pet Hair Eraser Vacuum Motor Replacement, Dirt Cup: 手順 1、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement, Dirt Cup: 手順 1、 2の画像 2
    • Firmly grasp the handle and press the release button.

    • Gently pull the dirt cup down and away from the vacuum body.

  2. Bissell Pet Hair Eraser Vacuum Motor Replacement, Power Button: 手順 2、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement, Power Button: 手順 2、 2の画像 2
    • Remove the six 1.2 mm Philips #2 screws from the handle and base.

  3. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 3、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 3、 2の画像 2
    • Grasp each half of the body and gently pull apart.

    • The green handle, power button, charge light lens, and dirt cup release are not fastened in place.

    • Once the case is split apart these items may come dislodged.

  4. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 4、 3の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 4、 3の画像 2 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 4、 3の画像 3
    • The power button can be removed by gently lifting it off the circuitry.

  5. Bissell Pet Hair Eraser Vacuum Motor Replacement, Motherboard: 手順 5、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement, Motherboard: 手順 5、 2の画像 2
    • Remove the battery plastic hold down by lifting it off the tabs.

    • Remove the battery by lifting straight up.

    • Position the battery aside.

  6. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 6、 3の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 6、 3の画像 2 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 6、 3の画像 3
    • Grasp the charger port and remove it by lifting it straight out of the case.

    • Set the charger port next to the battery.

  7. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 7、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 7、 2の画像 2
    • Remove the power button and charge LED light by gently pulling straight out of the case.

    • The vacuum motor can be removed by pulling straight out of the case.

    • All internals are now removed.

    • Set the case halves aside.

  8. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 8、 1の画像 1
    • Remove the two 1 mm Phillips #2 screws in the shown locations.

  9. Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 9、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement: 手順 9、 2の画像 2
    • Disconnect the power leads from the vacuum motor.

    • The red power lead goes on the terminal with the visible red dot.

  10. Bissell Pet Hair Eraser Vacuum Motor Replacement, Vacuum Motor: 手順 10、 2の画像 1 Bissell Pet Hair Eraser Vacuum Motor Replacement, Vacuum Motor: 手順 10、 2の画像 2
    • Grasp the vacuum motor and housing and pull them apart.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Jim Lopez

メンバー登録日: 09/20/18

586 ポイント

5のガイドは作成済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 23

今までの合計 1,079