Bissell Air180 Power Supply Replacement

はじめに

The power supply on the Bissell Air180 is the housing on the bottom half of the device housing the air filter. Through this housing, the power cord that is plugged into the wall sends power through the device. Removing the power supply will allow you to replace the entire power supply housing or replace the power cord.

必要な工具と部品

手順1 Air Filter

Bissell Air180 Power Supply Replacement, Air Filter: 手順 1、 2の画像 1

Bissell Air180 Power Supply Replacement, Air Filter: 手順 1、 2の画像 2

Squeeze the clip on the back panel of the bottom housing and pull the panel away from the housing, exposing the air filter.

編集

手順2

Grab the sides of the filter and pull it up.

編集

手順3

Pull the filter away from the bottom housing, removing it from the rest of the device.

編集

手順4 Power Supply

Bissell Air180 Power Supply Replacement, Power Supply: 手順 4、 1の画像 1

Remove the four 18mm Phillips #1 screws connecting the bottom housing to the rest of the device.

編集

手順5

Bissell Air180 Power Supply Replacement: 手順 5、 3の画像 3

Pull the bottom housing away from the rest of the device separating the power supply.
Unplug the red cord to fully disconnect the power supply from the fan and motherboard housing.

編集