メインコンテンツにスキップ

Besta Super 5000 Back Cover Replacement

必要な工具と部品

  1. Besta Super 5000 Back Cover Replacement, Battery: 手順 1、 1の画像 1
    • Turn the device over so that the barcode is facing upwards.

  2. Besta Super 5000 Back Cover Replacement: 手順 2、 2の画像 1 Besta Super 5000 Back Cover Replacement: 手順 2、 2の画像 2
    • Place your fingers on the battery cover arrow and pull the cover down and off the device.

  3. Besta Super 5000 Back Cover Replacement: 手順 3、 1の画像 1
    • Pull upwards on the battery tab to remove the battery from the device.

  4. Besta Super 5000 Back Cover Replacement, Back Cover: 手順 4、 1の画像 1
    • Remove the five screws around the edge of the device using a Phillips #0 screwdriver.

  5. Besta Super 5000 Back Cover Replacement: 手順 5、 1の画像 1
    • Remove the two screws behind the battery using a Phillips #0 screwdriver.

  6. Besta Super 5000 Back Cover Replacement: 手順 6、 2の画像 1 Besta Super 5000 Back Cover Replacement: 手順 6、 2の画像 2
    • Potential for device damage: All screws must be removed before you begin this step. Do not forcefully pry apart the device with screws still in it because you may damage it.

    • Gently pry off the backing using an opening tool.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

9人の作成者と共同で作成されました。

Jessie

メンバー登録日: 09/30/14

370 ポイント

3のガイドは作成済み

チーム

Ohio State, Team 1-5, Buehl Fall 2014 Ohio State, Team 1-5, Buehl Fall 2014人のメンバー

OSU-BUEHL-F14S1G5

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 6

今までの合計 276