メインコンテンツにスキップ
  1. Unplug from all cables
    • Unplug from all cables

  2. unscrew two Phillips screws on each side of the BCD3000 If the screws sit too tight, you can use the extension for better torque
    • unscrew two Phillips screws on each side of the BCD3000

    • If the screws sit too tight, you can use the extension for better torque

  3. unscrew another two Phillips screws on each side unscrew another two Phillips screws on each side
    • unscrew another two Phillips screws on each side

  4. Lift the upper control part. Be careful, there are still some cables connected to the lower section. Disconnect the cables by walking them out of their sockets.
    • Lift the upper control part.

    • Be careful, there are still some cables connected to the lower section.

    • Disconnect the cables by walking them out of their sockets.

  5. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  6. Remove the upper part completely.
    • Remove the upper part completely.

  7. Disconnect the two cables from the lower section to the connector board.
    • Disconnect the two cables from the lower section to the connector board.

  8. Slide the lower section to the front. Now you can lift it and take it aside. Now you can lift it and take it aside.
    • Slide the lower section to the front.

    • Now you can lift it and take it aside.

  9. Disconnect the separate boards. Now you can take the modules out by unscrewing them from the case. Now you can take the modules out by unscrewing them from the case.
    • Disconnect the separate boards.

    • Now you can take the modules out by unscrewing them from the case.

  10. The jog wheels on the front panel can be taken off by using a spudger and levering them out. The jog wheels on the front panel can be taken off by using a spudger and levering them out.
    • The jog wheels on the front panel can be taken off by using a spudger and levering them out.

  11. The knobs can easy be removed just by pulling. The knobs can easy be removed just by pulling.
    • The knobs can easy be removed just by pulling.

  12. Same goes for the knobs on the top section of the front panel. Same goes for the knobs on the top section of the front panel. Same goes for the knobs on the top section of the front panel.
    • Same goes for the knobs on the top section of the front panel.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Tobias Isakeit

メンバー登録日: 2014年03月31日

46,713 ポイント

108のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

101 メンバー

8,660のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 15

今までの合計 1,177