リペアコミュニティに参加 - アカウントの作成

はじめに

Use this guide to replace the earpads of Beats solo 3.

In many situations, the earpads of Beat solo 3 would be broken and smelly after a long time because people often wear them during sports. When people know how to replace the earpads, they can save money and have a better user experience.

必要な工具と部品

手順1 Earpads

Beats Solo 3 Earpads Replacement, Earpads: 手順 1、 2の画像 1

Beats Solo 3 Earpads Replacement, Earpads: 手順 1、 2の画像 2

この手順で使用する道具：

Halberd Spudger

$2.99

購入する

Use a halberd spudger to create a gap between the earpads and the main body.

編集

FixBotに聞いてみる

手順2

Peel away the earpads from the headphone earcups.
Be gentle when separating the earpads from the main body. Too much force may damage the main body.

編集

FixBotに聞いてみる

手順3

Beats Solo 3 Earpads Replacement: 手順 3、 3の画像 3

Remove the black tape with your hands.
Be sure to clean the black tape thoroughly, as uncleaned tape can hinder the adhesive of the new pads.

編集

FixBotに聞いてみる

手順4

Spread a thin layer of glue around the grey perimeter of the new earpads.
Don’t put too much glue on or it will spill out and make the earpads dirty.

編集

FixBotに聞いてみる

手順5

Install the new pads.
Be sure to position the earpads properly on the earcups before adhering.
The pads may take a minute to stay together, be patient.
Note that the earpads have a specific right and left side. Be sure to match up the side with the charging port to the pad with the depression for that port.