メインコンテンツにスキップ

Battery Disconnect

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Battery Disconnect, Disconnect the battery: 手順 1、 1の画像 1
    • Peel back the tape covering the battery connector enough to reveal the connector underneath.

  2. Battery Disconnect: 手順 2、 2の画像 1 Battery Disconnect: 手順 2、 2の画像 2
    • Use a spudger to slide the battery connector parallel to the logic board and out of its socket on the logic board.

終わりに

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

メンバー登録日: 04/11/15

196,326 ポイント

416のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 78