はじめに

This guide will provide step by step instructions on how to locate and open the battery compartment, then install the batteries.

ツール

工具は必要ありません。

Locate the battery compartment on the bottom right of the camera.
  • Locate the battery compartment on the bottom right of the camera.

コメントを追加する

While holding the camera with the lens facing toward you, slide the lock button to the right and pull the battery door towards you. The battery door should pop open.
  • While holding the camera with the lens facing toward you, slide the lock button to the right and pull the battery door towards you. The battery door should pop open.

  • If the door does not pop open, gently lift the door using your finger.

コメントを追加する

  • Remove the dead batteries. The easiest way to do this is by turning the camera right side up and gently tapping the lens side of the camera against your hand until they fall out. If this does not work, you can simply pull them out.

コメントを追加する

  • Insert fresh AA batteries into the compartment as demonstrated in the picture to the left. The orientation of the batteries is important to ensure the camera works properly.

  • Close the battery door.

    • Remember to slide the switch back into the lock position.

コメントを追加する

まとめ

Reassembly of the camera is the final step in the guide.

Richard

メンバー登録日: 2012年04月19日

3 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 9-43, Regan Spring 2012 Cal Poly, Team 9-43, Regan Spring 2012人のメンバー

CPSU-REGAN-S12S9G43

5 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 1,632